top of page

The HPHSMARTSPEED takes speed correction to a whole new level.  We provide our powerful HP1000 smart controller with this package, allowing the owner to easily change their correction using a smartphone.  This solution is idea for the owner who needs to adjust their speed correction factor frequently when changing between tracks and tires, or for the owner who wishes to make their Polaris vehicle safer for young and/or untrusted riders with the ability to easily switch the Polaris vehicle in and out of speed restriction modes.  Also, the HPHSMARTSPEED system is ideal for the owner who simply wants the best.  For Polaris owners who want to take advantage of other features that the HPH1000 can offer such as infrared belt monitoring, RTD monitoring, blower control, data logging and more we recommend upgrading to a more powerful package such as the Performance, Performance Plus, or Ultimate Packages found under or Infrared products page or in our general product store.    Click here for info on other packages

 

 

The HPH Smart Speed Package Includes the Following: 

 

HPH1000-00-SC-00-00 - Controller  Output Ranges  0.5A @ 12VDC

The HPH1000 series controllers are used for many of the HPH product offerings and can be ordered with different options as follows:

-IR: Support for Infrared Monitoring

-SC: Support for Speed Correction

-DL: Support for Data Logging

-WB: Support for Wheel Bearing Monitoring

 

An HPH1000-00-SC-00-00 controller is provided with this package.

 

 The HPH1000 series controllers are very low profile (3" wide x 3" deep x 1.5" tall) permitting an easy installation just about anywhere.  They are packaged in a waterproof, submersion capable enclosure permitting direct mounting in wet environments. The HPH1000-00-SC-00-00 has the following features:

  •  Wi-Fi Hot Spot: The HPH 1000 controller features a Wi-Fi hotspot and smartphone interface that is compatible with both Android and iOS smartphones. They also support any device with a web browser, such as a laptop. The smartphone interface ensures configuration is intuitive and easy.  
  • The HPH 1000 controller requires 12 VDC to operate and is powered through its 10 pin female Delphi connector.  Only two of the pins are required to provide power to the HPH 1000 controller.  Numerous harness options are available for purchase to make power connection to the HPH 1000 controller easy.
  • Support for speed correction.  Speed correction is used to compensate for addition of aftermarket parts such as oversized wheels or tracks.  For example, if the owner of a Polaris Ranger puts tracks on the speedometer will be off by as much as 40%, causing the Ranger to go into speed limitation well before it is actually at that speed, this robs the driver of performance.  Speed correction can also be used to restrict a driver from going too fast, and can be used to create a safer ride for inexperienced riders, such as youth riders.  The HPH1000 speed correction works on vehicles that use a hall effect sensor for speed detection.  HPH has custom harnesses to accommodate the Polaris hall effect sensors, allowing for plug and play.  For non-Polaris solutions, some custom wiring may be required.  In order to use speed correction, the HPH1000 controller must be ordered with option code -SC. If the customer has an HPH1000 controller without the -SC option code and later wishes to add speed correction, it is possible to purchase an upgrade to the existing controller (A description of this is given in our FAQ section). 

 

HPHWH1

 

The HPHWH1 is commonly purchased as part of a package that includes an HPH1000 controller. 

  • This harness provides a means to connect power to the HPH1000s 10 pin connector.
  •  Generous, 12.5 foot, spade terminated power leads for connection to a 12VDC source.
  •  2 pin female Delphi connection for connection to a speed harness (HPHWH5).
  •  All cables are protected with flame retardant (UL-94 / V2), polypropylene wire loom rated for installations from -40°F to 275°F.

 

HPHWH5

The HPHWH5 is commonly purchased as part of a Polaris package.  It is used to connect the Polaris Hall Effect Speed Sensor to the HPHWH2 main harness. 

   The HPHWH5 features the following:

  • 2 pin male Delphi connector for connection to HPHWH1 harness. 
  • 3 pin male / female 'Y' connector to allow insertion between the Polaris Hall Effect Speed Sensor and the Polaris ECU.  Under this configuration, the speed signal is run to the HPH1000, conditioned, and then routed to the Polaris ECU.
  •  All cables are protected with flame retardant (UL-94 / V2), polypropylene wire loom rated for installations from -40°F to 275°F.

HPH SMARTSPEED for Polaris

SKU: HPHSmartSpeed - In Stock
$189.00Price
  • If you are unhappy with your purchase, please let us know!  If the item is in like-new condition, we're happy to refund or exchange your purchase when we recieve the item back

bottom of page